Changde Binglun water-cooled brine units · Fluid and condenser duty
Select the actual brine/glycol formulation and condenser-water conditions before interpreting the 60P catalogue label.
From Changde Binglun · Chiller assembly and refrigeration supply
Individual product research · HVACDeck Editorial · Sources checked 2026-10-11
Define both liquid circuits for the assembled brine unit
The official Changde Binglun catalogue names a 60P water-cooled brine unit. The company description separately identifies brine/ethylene-glycol unit assembly production. Its original product photograph shows refrigeration equipment beside a control enclosure with gauges and a display, but the product body supplies no selected temperature, capacity, fluid-concentration or condenser-water schedule. The photograph and catalogue label establish the offer, not a verified low-temperature performance rating.
This unit requires a different enquiry from an ordinary chilled-water assembly because the actual secondary fluid and concentration affect selection and the external condenser-water circuit must also be defined. The catalogue's brine word does not identify a particular salt solution, and the company-level ethylene-glycol wording is not a mandatory fluid formulation for every quoted unit. The 60P label is retained as a supplier label rather than converted into an invented cooling kW value.
Published parameters and their scope
This is an equipment family; its range does not identify one orderable configuration.
- Family designation
- 60P-labelled water-cooled brine assembly
Swipe the table, or focus it and use arrow keys, to read the conditions and sources.
| Parameter | Published value | Conditions and evidence |
|---|---|---|
| Official offer | 60P water-cooled brine unit | Exact product heading; P label is not converted into cooling capacity. Source |
| Company-level assembly scope | Brine/ethylene-glycol unit assembly | Official company description; selected fluid composition remains unknown. Source |
| Original equipment photograph | Refrigeration assembly and control enclosure with gauges/display | Image inspected; compressor model, refrigerant and circuit functions not fully issued. Source |
| Missing low-temperature schedule | Fluid, concentration, temperatures, capacity and flow not supplied | No inferred minimum outlet temperature, freeze margin or pump selection. Source |
| Missing heat-rejection schedule | Condenser-water temperatures, flow, losses and utility scope | Water-cooled title does not establish cooling tower/pump inclusion. Source |
Selection and application review
Name the secondary fluid and selected temperature point
Provide the intended secondary liquid, concentration basis and required entering/leaving temperatures with thermal load or flow. Ask the assembler to identify the approved fluid/material combination and issue a rating for that actual formulation. Brine and ethylene glycol are not interchangeable words for one unspecified circuit.
Obtain the selected permissible fluid/temperature limits and freeze-protection basis from issued documents. No minimum temperature or numerical freeze margin is calculated from the 60P label or the photograph. The website provides no independently inspected low-temperature test.
Select hydraulic interfaces using the actual formulation
Request evaporator/secondary-side allowable pressure, pressure drop and required flow protection at the selected fluid condition. Identify pump duty and whether tank, strainers and other auxiliaries are included. A water-only selection from a different unit cannot be assumed to apply to the actual brine/glycol formulation.
Give the project route and connection requirements to the responsible designer and supplier. Obtain the selected insulation and permissible condensation/service conditions. The catalogue gives no material record establishing compatibility with every salt or glycol formulation.
Define the water-cooled condenser circuit
Issue condenser-water entering/leaving design conditions and available utility scope. Ask for required flow, connection/pressure-loss data and the selected heat-rejection duty. Identify whether a tower, pump, water treatment and connecting pipework are included in the quotation or provided separately.
The water-cooled heading is the basis for requesting these interfaces; it is not a complete cooling-tower selection. No project ambient correction, condenser fouling factor or available pump head is invented where the source supplies none.
Obtain circuit, controls and acceptance records
Request the actual compressor/refrigerant list, assembly nameplate, circuit drawing and purchased-component traceability. The company sells agency products as a separate business role; those listings do not establish the components fitted to this brine unit.
Agree performance/input verification at the actual fluid and condenser-water conditions, together with selected flow/temperature protections and assembly checks. Confirm alarm behaviour, start/stop sequence, dimensions, service parts and warranty boundaries. Current price, lead time and independent efficiency/test outcomes remain unknown.
Fix the fluid and thermal point
Name formulation/concentration, temperatures and required load/flow.
Close both hydraulic circuits
Obtain secondary-fluid and condenser-water ratings, losses and auxiliary scope.
Verify the delivered assembly
Agree model-specific performance, circuit/protection and assembly acceptance records.
Sources and review scope
Compiled by HVACDeck Editorial. Source review identifies what the publication states; it is not an independent performance test or certification.
- Official 60P water-cooled brine unitChecked 2026-10-11 · Complete heading/body and original controls/assembly photograph inspected; no selected fluid, low-temperature or condenser-water schedule supplied.
- Official company brine/glycol assembly scopeChecked 2026-10-11 · Exact assembly statement read; fluid identity/concentration not inferred for every order.
Editorial method and corrections · Report a detail with this page URL
Turn the evidence into an enquiry
Send the manufacturer your required duty, installation conditions and the unresolved items identified in this brief.
Other equipment from this manufacturer
Changde Binglun chillers · Rated-point and assembly evidence