A Shenyang heat-pump supplier presenting design, manufacturing and commissioning; review source heat, system boundaries and dated project evidence together.
1 published equipment referenceLatest source review 2026-10-11
01 / COMPANY
What this manufacturer offers
The official Chinese introduction identifies 沈阳中科信盈人工环境设备有限公司 and offers consultation, design, equipment manufacturing, installation/commissioning and operational services for heating, domestic hot water, cooling and bathing-wastewater heat recovery. Its catalogue separates shower hot water, steam-room high-temperature equipment, pool temperature control and heating applications.
The wastewater route is an application-specific system enquiry. Available discharge temperature/flow, contamination and operating hours determine how much source heat can be recovered; a general bather count cannot replace that evidence. The current reviewed product source identifies DP-Y220II, and the separate product brief records a previous directory-designation discrepancy rather than silently treating names as interchangeable.
Two original supplier case articles contain dates and equipment combinations. Original patent publications and displayed certificate images also document defined subjects. This profile keeps those records separate from present operating performance, current legal status and model-specific conformity.
Official entity
沈阳中科信盈人工环境设备有限公司Chinese introduction/contact page, displayed licence and original patent applicant identify the entity. Source
Published contact location
118-4 Hongrun Road, Door 4, Yuhong District, Shenyang, LiaoningOfficial contact wording; footer additionally says 18th floor. Not an independently audited factory location. Source
Displayed company establishment
6 June 2016Official gallery’s business-licence image; historical display, not a current registry-status check or the start of all staff experience. Source
Current reviewed source entry
ZKXY-DP-Y220II wastewater heat-recovery hot waterCurrent official product heading; earlier directory SY-220II alias not established. Source
Historical technical publication
CN111219777A — public-bathroom heat-recovery hot-water systemOriginal 2020 application publication naming the company; not a DP-Y220II certificate or field-performance report. Source
Swipe the table, or focus it and use arrow keys, to read conditions and sources.
Manufacturer-published information · ZKXY-DP-Y220II
Parameter
Published value
Conditions and evidence
Current official designation
ZKXY-DP-Y220II
Observed source heading. Earlier SY-220II directory name is not established as an interchangeable variant. Source
Application description
Bathing-wastewater heat recovery for hot water
Source description; exact source quality/flow and selected hot-water duty are not rated on the page. Source
Illustrated hot-water labels
10°C inlet; 65°C hot-water outlet
System-principle graphic labels only, not a measured DP-Y220II rating or guaranteed envelope. Source
Illustrated wastewater label
5°C wastewater discharge
Graphic illustration, not a proven project discharge condition or minimum operating limit. Source
Published performance gaps
Heating duty, water production, input and refrigerant unspecified
No model-specific numerical schedule supplied by the reviewed detail. Source
03 / PROJECT REVIEW
A useful Zhongke Xinying review starts with the bathing facility’s source and demand
Match each heat-pump family to its actual water duty
The homepage distinguishes one-pass shower hot water, steam-room high-temperature equipment, pool temperature control and heating. Its 95°C high-temperature wording, titanium heat-exchanger wording and R410A heating-family wording appear in different application descriptions. They should not be combined into a specification for DP-Y220II.
For a multi-use facility, tell the supplier which loads must run together, with their temperatures, schedules and storage arrangements. Request separate selected outputs and a control sequence. A turnkey description does not establish that every displayed source route, circulation system or cooling mode is included in a particular package.
Shower hot-water supply
Provide hourly demand, cold-water inlet and required supply/storage temperatures, with peak and start-up requirements.
Wastewater heat recovery
Measure recoverable flow/temperature across the same hours, contamination and interruptions; define collection, source exchanger and secondary-loop responsibilities.
Obtain the applicable family/model selection and temperature/material/control requirements separately. Do not transfer another family’s headline values.
The indirect-exchange description needs an order-specific schematic
The homepage explains an immersed wastewater exchanger and circulating secondary fluid that carries recovered heat to the heat-pump evaporator. Its current principle graphic illustrates wastewater collection, a well-water source route and summer cooling. The graphic’s temperature labels are illustrative, not a certified unit rating.
Have the selected design identify wastewater, secondary/source, refrigerant and domestic-water circuits, with materials, pumps, access and control interfaces. Confirm collection/storage and cleaning provisions and have the project designer review the actual installation requirements. The supplier’s no-maintenance and long-life wording is not an inspected maintenance plan or a written guarantee for a specific wastewater composition.
Read the bathhouse case as a dated supplier account
The supplier’s 12 April 2020 Letanghui article says the Shenyang bathing project entered use in 2017. It describes a 4,000 m² facility, three Y100 units and one D100 high-temperature unit, serving bathing, steam-room and cooling duties. It also gives customer-flow and area figures. These are the supplier’s historical account, not an independently measured performance report.
The article does not identify DP-Y220II, supply rated conditions or demonstrate the facility’s current operation. For a comparable project, request the actual source/demand brief, equipment/control arrangement, commissioning record and relevant customer reference. Equipment counts and visitor numbers do not by themselves establish the duty of a new installation.
Historical installation description
Three Y100 plus one D100 and reported 2017 start of use; source article published in April 2020.
Ask how hot-water, high-temperature and cooling loads were separated, how source availability was handled and what evidence measured acceptance.
The school case uses two Y100 units, not the reviewed DP model
The original 27 May 2019 school article lists two Y100 units for shower hot water and claims production above six tonnes per hour. It supplies no inlet/outlet water conditions, time-based measurement or third-party test supporting that quantity. The claim is not used to rate DP-Y220II or size an unrelated school.
For an institutional hot-water enquiry, provide simultaneous use and peak draw-off, recovery time, storage and source availability. Ask for a duty-specific selection and evidence tied to the proposed model combination. The source article is a lead for further reference checking, not a substitute for those calculations.
What the dated article identifies
Two Y100 units and shower-hot-water use at an unnamed Shijiazhuang school; supplier-reported quantity lacks stated test conditions.
Patent documents support defined disclosures, not every sales assertion
The original CN111219777A application publication, filed on 26 February 2020 and published on 2 June 2020, names the company and discloses a public-bathroom heat-recovery hot-water system. Its official-site gallery separately displays grant-certificate images for that subject (CN111219777B) and a high-temperature steam-room heat-pump system (CN111237851B).
These are different documented subjects. No current rights/status determination or correspondence to a particular DP-Y220II assembly is established here. The patent documents are not efficiency certificates, product safety approvals or confirmation of advertised savings. The displayed business licence’s 2016 establishment date is also distinct from the homepage’s twenty-year experience wording.
Published invention
Use the original applicant, date and disclosed subject as limited historical technical evidence.
Separate advertised assistance from contractual service delivery
The homepage offers free scheme design, on-site installation guidance, commissioning/training and after-sales guidance, with 24-hour-plus service wording. The reviewed pages do not define fixed warranty duration, destination coverage, arrival/repair deadlines or which works the supplier performs rather than guides. The official contact page gives a separate after-sales telephone and email; the existing private CRM email has been preserved, with no message sent.
For a heat-recovery project, keep the design, civil collection works, water/electrical connections, controls and commissioning parties explicit. Agree what is measured at handover and who maintains the source-side equipment thereafter.
Approve project and equipment boundaries
Identify the contracting entity, supplying site, selected model, collection/storage works, exchanger, pumps, controls and installers.
Approve inspection and commissioning
Agree source/demand conditions, delivered hot-water duty, electrical/auxiliary measurement boundary and test records.
Approve handover and support
Retain drawings and instructions, source-cleaning/access arrangements, spare-parts scope and written warranty/support at the project destination.
07 / TRANSPARENCY
Sources and review scope
Compiled by HVACDeck Editorial. Page review: 2026-10-11. Publications are attributed below; their statements are not independent measurements by this platform.
Official Zhongke Xinying company introductionChecked 2026-10-11 · Original Chinese entity and project-service scope read; general quality/experience statements not independent audit evidence.
Official contact and after-sales detailsChecked 2026-10-11 · Published address/email/support routes read; contact address not factory audit. Existing CRM field preserved privately.
Current official DP-Y220II product entryChecked 2026-10-11 · Current heading and photograph/system graphic inspected; earlier directory model discrepancy recorded and corrected.
Official licence/patent galleryChecked 2026-10-11 · Three original images individually inspected: 2016 business-licence establishment and two separate patent subjects. No current registry/rights inference.
