WF fixed directional
Wall/suspended support and issued aiming/retention drawing.
EQUIPMENT / EQUIPMENT FAMILY
Bigfans Fengzhi WF directional wall/suspended fans
A guarded directional assembly requires a selected support design and actual air-speed map; a motor standard claim is not whole-unit certification.
From Bigfans Wuhan · Large-space air-movement equipment
Individual product research · HVACDeck Editorial · Sources checked 2026-10-11
Approve directional circulation where ceiling mounting is constrained
Bigfans’ Fengzhi WF family is presented as a directional fan that can be wall-mounted or suspended where large open ceiling blades cannot be installed. The original image shows a guarded circular wheel with a rear motor/support arrangement. WF15 and WF20 list diameters of 1.5 and 2.0 m and masses of 110 and 130 kg. A mounting photograph alone does not establish the wall substrate, anchors, dynamic loads or permitted direction-adjustment mechanism.
WF20 lists 0.5 kW and 280 rpm, while WF15 again has a 0.5 W power entry requiring confirmation. The page claims a first-level PMSM motor under GB30253-2013, but no current model-specific energy report or applicable-edition verification was obtained. Its greater-than-25 m reach statement has no defined air-speed criterion. Select the actual support and occupied-zone delivery together rather than qualifying the unit through the family’s promotional comparison with small wall fans.
Published parameters and their scope
This is an equipment family; its range does not identify one orderable configuration.
- Family designation
- WF15 / WF20
Swipe the table, or focus it and use arrow keys, to read the conditions and sources.
| Parameter | Published value | Conditions and evidence |
|---|---|---|
| WF20 reference | 2.0 m; 280 rpm; 130 kg; 0.5 kW motor | Current support/connection drawing and total input unprovided. Source |
| WF15 power question | 1.5 m; 300 rpm; 110 kg; 0.5 W printed | Unresolved unit conflict; no inferred correction. Source |
| Published flow/current | WF15/20 1,588/2,355 m³/min; both 1.8 A / 220 V | No installed directional-flow, phase or controller input basis supplied. Source |
| Mounting/reach | Wall or suspension options; advertised distance over 25 m | No anchor/substrate/adjustment or measured reach specification. Source |
| Motor energy statement | Level 1 claimed under GB30253-2013 | Current applicable edition and exact motor report unverified; not a whole-unit conformity approval. Source |
Selection and application review
Choose the actual directional air path
Supply the occupied positions, distance, obstacles and desired air-speed range. Obtain a selected directional layout or measured map for the actual installation. The source’s comparison with twenty small fans supplies no matched flow, power or room-condition test.
Identify whether the unit is intended to circulate room air or works alongside a separate ventilation/extraction system. A wall fan does not itself establish outdoor-air exchange, contaminant removal or a fixed temperature reduction.
Freeze wall or suspended supports and adjustment limits
Issue the wall/beam substrate and available support location to the responsible installer/engineer. Request actual mounting loads, anchors, guard/service envelope and permitted directional adjustment from an issued model drawing. Listed mass is not a complete dynamic support schedule.
Confirm how the assembly is retained and how its direction is changed. The rear-view photograph is useful for arrangement, but no anchor rating, adjustment range or installed safety approval was reviewed. Do not copy ceiling-family clearances as if they were issued WF instructions.
Verify the selected motor rather than a broad standards claim
Resolve WF15’s 0.5 W row and obtain motor/controller input, voltage/phase and protective information. Ask for the exact energy-efficiency report, model scope and applicable standard edition behind the source’s GB30253-2013 statement. The platform has not established current level-1 conformity.
Agree included controls and environmental limits. A sealed double-bearing/maintenance-free statement supplies no whole-unit ingress rating, service interval or hazardous-area approval. Obtain the actual installation and maintenance file.
Accept the directed assembly at the real location
Approve the selected mounting arrangement, current model schedule and guarding/control documents. Verify support/retention, adjustment and agreed occupied-zone delivery across the intended speed range. No source test establishes a guaranteed reach beyond 25 m under arbitrary obstructions.
Close cleaning, inspection access and service responsibilities. Current price, delivery and independently verified small-fan equivalence remain unknown. Both WF sizes stay in one directional-family brief, with mounting decisions distinct from XM’s wheeled handling.
XM movable alternative
Floor restraint, handling and temporary cable route.
Evidence required for either
Actual zone air map, motor/input schedule and service file.
Sources and review scope
Compiled by HVACDeck Editorial. Source review identifies what the publication states; it is not an independent performance test or certification.
- Official Fengzhi WF familyChecked 2026-10-11 · Complete table, mounting options and motor-standard/reach claims read; scope and unit conflict retained.
- Original directional fan imageChecked 2026-10-11 · Rear guard/motor/support arrangement visually inspected; exact installed anchors/adjustment unverified.
Editorial method and corrections · Report a detail with this page URL
Turn the evidence into an enquiry
Send the manufacturer your required duty, installation conditions and the unresolved items identified in this brief.
Continue the selection
Other equipment from this manufacturer
Bigfans Fengchi BFFCA industrial ceiling fans
Bigfans Airova Pro AP commercial ceiling fans
Bigfans Airova Max commercial ceiling fans
Bigfans P column-supported large-space fans